Ultrasonic cleaning machine derusting video and principle characteristics

In our daily life, a lot of metal tools, metal parts, placed in the air for long, will be rusty, rust will shorten tool, the service life of parts, and it become the use of tools is not so comfortable, or simply can't use, and how fast effective descaling, has always been a difficult problem in industry. The traditional manual rust removal method, cleaning efficiency is poor, and chemical rust removal, and will cause a tool damage. It was not until the emergence of ultrasonic cleaning machine that this situation was completely changed.

Rust removal principle of ultrasonic cleaning machine

Ultrasonic generator issued by the high frequency oscillation signal, through the transducer into high frequency mechanical oscillation and spread to the medium - water (add a certain proportion of cleaning agent), ultrasonic in the cleaning liquid density and phase forward radiation, so that the liquid flow and produce tens of thousands of 50-500μm diameter of tiny bubbles, Tiny bubbles present in the liquid vibrate in response to a sound field. These bubbles form and grow in the negative pressure region where ultrasonic waves propagate longitudinally, while in the positive pressure region, when the sound pressure reaches a certain value, the bubbles grow rapidly and then suddenly close. When the bubble is closed, the shock wave is generated and thousands of atmospheres are generated around it, destroying insoluble dirt and dispersing them in the cleaning liquid so as to achieve the purpose of cleaning parts.

Scope of application of ultrasonic cleaning machine

Suitable for hardware parts jewelry circuit board oil removal rust removal wax removal carbon cleaning dirt, laboratory emulsification, dispersion, help dissolve, extract, defoaming and so on.

Matters needing attention in the application of ultrasonic cleaning machine

In use, prevent the first boot after pouring cleaning liquid, so that the machine will be damaged. Corrosive or flammable or explosive liquids shall not be used as cleaning fluids. If corrosive or volatile cleaning liquid is needed, add water to the cleaning tank, then pour the cleaning liquid into the container and the cleaning object, and then dip the container containing the cleaning liquid and the cleaning object into the cleaning tank.